Original
By certification 
|
This product |
ATP-G31M-12100 |
|
category member |
ATP-G31-12120 |
|
category member |
ATP-G31-12160 |
|
category member |
ATP-G31-2480 |
|
category member |
ATP-G31-4840 |
Â
|
General Specifications |
|
|
Nominal voltage |
12.8V |
|
Maximum charge voltage |
14.6V |
|
Nominal capacity @1C/1C |
100Ah |
|
Energy |
1.280kWh |
|
Cell chemistry |
LiFePO4 |
|
Cycle life at 100% DOD |
>3,500 |
|
Parallel cascade |
Up to 4 units |
|
Serial cascade |
TBD |
Â
|
Discharge |
|
|
Maximum continuous discharge current |
250A |
|
1st Level cut-off |
270A @3S |
|
2nd Level cut-off |
630A @1S |
|
Short circuit cut-off |
1000A @300μS |
Â
|
Charge |
|
|
Maximum charge current |
100A |
Â
|
Dimension (L*W*H) |
259*167*210 mm 10.20x6.57x8.27 inch |
|
IP rating |
IP67 |
|
Built-in self heating pad |
YES |
|
Design compliance |
UN 38.3, IEC 62133 |
Â
Energy Density
ATP-G31M-12100 is practically alone in the industry in offering 12V100Ah (1.280kWh) in the BCI G31 mini size 10.20x6.57x8.27 inch
Â
Opportunity Charging
A depleted ATP-G31M-12100 may be fully charged in less than 70 minutes with a charge current of 1C
Â
Long Cycle Life
The advanced battery pack design and superior cell consistency allow for up to 3,500 charge/discharge cycles
Â
Expandable Capacity
To deliver up to 400Ah (5.120kWh) of energy, up to 4 ATP-G31M-12100 units can be connected in parallel. This battery bank is capable of receiving simultaneous charges and discharges.
Â
SOC Estimation by Current Integration
Because of the inbuilt coulomb counting ADC, RSOC is calculated using current integration rather than open voltage measurement
Â
Charging at Low Temperature
Additionally, the integrated self-heating pad and sophisticated algorithm allow charging the battery at low temperature ranges
Â
http://www.atpbattery.com/
