Original
By certification 
Xiamen Keyuan Plastic Co.,Ltd is one of the professional toughness pc manufacturers, you can order high quality toughness pc at good price from our factory.
PC-product Specifications
Specifications
PC plastic modified
1.high mechanical strength
2.high softening point,good wear resistance
We also can modified plastic materials according to customer's need.
| Product name | PC with toughness |
Color |
As required |
Advantage |
Competitive price,high quality,on-time delivery,free sample |
Environment friendly | |
High Heat Resistance,High impact resistance | |
Without any impurity | |
Can be reinforced with the glass fiber/toughness/flame retardant/UV stabilizer | |
Packing |
25kg/bag (also can be customized) |
PC-Product Properties
Item |
Test conditions |
Typical Characteristic |
Unit |
Testing Standard |
KY-IF-10G | ||||
Melt Flow Rate |
--- |
10.5 |
g/10min |
ASTM D-1238 |
Molding Shrinkage |
3.2mm |
10-³ |
ASTM D-955 |
|
Density |
--- |
1.2 |
--- |
ASTM D-792 |
Water Absorption |
% |
0.15 |
--- |
ASTM D-570 |
Tensile Strength |
Yield point |
62 |
Mpa |
ASTM D-638 |
Tensile Strength |
Breaking point |
69 |
Mpa |
ASTM D-638 |
Tensile elongation |
Breaking point |
130 |
% |
ASTM D-638 |
Flexural Strength |
--- |
96 |
Mpa |
ASTM D-790 |
Flexural Modulus |
--- |
2343 |
Mpa |
ASTM D-790 |
Impact strength |
23℃ (gap) |
800 |
J/M |
ASTM D-256 |
Rockwell hardness |
R |
118 |
--- |
ASTM D-785 |
Loss Factor |
60HZ |
0.0009 |
--- |
ASTM D-150 |
Loss Factor |
1MHz |
0.01 |
--- |
ASTM D-150 |
Permittivity |
60HZ |
3.17 |
--- |
ASTM D-150 |
Permittivity |
1MHz |
2.96 |
--- |
ASTM D-150 |
Volume Resistivity |
--- |
1.0×1017 |
Ohm-cm |
ASTM D-257 |
Flame Retardant |
UL94 |
HB |
--- |
UL 94 |
Flame Retardant |
--- |
1.1 |
mm |
UL 94 |
Heat distortion strength |
0.45MPa |
137 |
℃ |
ASTM D-648 |
Heat Deflection Temperature |
1.8MPa |
132 |
℃ |
ASTM D-648 |
Vicat Softening Point |
--- |
154 |
℃ |
ASTM D-1525 |
CLTE |
--- |
6.8×10-5 |
1/℃ |
E831 |
Long-term use temperature UL |
--- |
130 |
℃ |
UL746B |
Use temperature | ||||
Processing temperature : 230 - 250 °C | ||||
Mould temperature : 100 - 120 °C | ||||
Back pressure : ca.10 - 15 bar | ||||
Injection speed : medium/high | ||||
Pre-drying : necessary | ||||
PC-Product certification
PC-Productionflow
PC - Our Cooperative Customers
PC-Tranportways
